Basic InstructionsUnicorn SPiT can be diluted by up to 70% with water to customise your stain. Simply add 10 parts Unicorn SPiT with up to 7 parts water in a resealable container. Perform a test on a spot-test as you add water to ensure the desired result is achieved. Mixing water with Unicorn SPiT helps the product to absorb into porous surfaces.
Ensure your surface is clean and free of any dust, dirt, grime, oil, sealer, stain, paint, or anything else that may prevent clean application on the surface. Apply your mixture directly to the surface.
Unicorn SPiT dries quite quickly once applied. Use a spray bottle of water to keep it from drying out and allow it to be manipulated directly on the surface.
Complete your design in one colour or add multiple colours to achieve your desired look.
Allow your work to dry completely.
Use a scourer pad or sponge following the grain to lightly buff the surface and remove any excess product or clumps that may have formed. Then dust off thoroughly.
Seal with Glaze Coat by Famowood or a similar oil based sealer. The more coats of sealer you use, the better it will look. High Gloss Sealers will help you achieve a THREE DIMENSIONAL look.
Use on Glass, Metal & Laminate
Unicorn SPiT can be diluted by up to 10% with water to customise your paint. Simply add 10 parts Unicorn SPiT with up to 1 part water in a resealable container. Test your paint on a small piece of dry, clean and bare sample article while adding the water to you get your preferred effect.
Clean your surface and ensure it's completely void of any sticky residue, oil, dirt or grime.
Laminate - sand your surface with 220 grit sand paper, then dust well before applying paint.
Glass - for items which will be handled often, apply a thin layer of Mod Podge Dishwasher Safe on the surface, allow it to dry completely before appying Unicorn SPiT. This makes it more durable. Mod Podge is not necessary for use on the inside of glass.
Allow your work to dry.
You may choose to use a scourer pad following your pattern to lightly buff the surface and remove any excess paint or clumps that may have formed.
Dust off thoroughly.
Seal your work with any Glaze Coat by Famowood or similar oil based sealer. The more coats of sealer you use, the better it will look.
|
|
Unicorn SPiT Projects & Tips
Check out these instructional videos for a wealth of knowledge and advice. There are some great projects you can try at home.
|
|
|
|
|
|
|
|
Sparkle SPiT Projects & Tips
Sparkle SPiT is an amazing product which can create many different shimmery and glittery effects.
|
|
|
|
|
|
|
|
Famowood Glaze Coat Projects & Tips
Famowod Glaze Coat Epoxy Resin is not only perfect for sealing and finishing Unicorn SPiT projects. It's also perfect for restoring furniture, filling imperfections in wood and making jewellery! Yes it also works perfectly in jewellery bezels and molds to seal dry flowers, trinkets, stones and more.
|
|
|
Adding Extra Sparkle & Shimmer
PearlEX Pigment Powder and Unicorn SPiT Gel Stain and Glaze can be used together to create stunning effects on various surfaces, such as wood, fabric, canvas, paper, and more.
PearlEX Pigment Powder is a fine powdered pigment that is made from mica particles coated with various colours. It has a pearly, shimmery effect and can be mixed with Unicorn SPiT Gel Stain and Glaze, to create custom colours and effects. PearlEX Pigment Powder comes in a wide range of colours and can add a luminous and iridescent quality to your projects.
When using PearlEX Pigment Powder with Unicorn SPiT Gel Stain and Glaze, you can mix the pigment powder into the gel stain or glaze to create custom colours or effects. The PearlEX Pigment Powder can add a pearlescent, shimmery, or iridescent quality to the Unicorn SPiT, resulting in unique and eye-catching finishes on your projects.
To use PearlEX Pigment Powder with Unicorn SPiT Gel Stain and Glaze, you can follow these general steps:
It is important to note that the specific techniques and results may vary depending on the type of surface, the colours and ratios used, and other factors. It's recommended to experiment on a small test piece before applying the technique to a larger project to ensure the desired outcome. Always follow the instructions and safety precautions of the specific products you are using, and work in a well-ventilated area.
If you’d like to purchase PearlEX Pigment Powders, they’re available to order from the local Australian craft supplier, Beads N Crystals.
PearlEX Pigment Powder is a fine powdered pigment that is made from mica particles coated with various colours. It has a pearly, shimmery effect and can be mixed with Unicorn SPiT Gel Stain and Glaze, to create custom colours and effects. PearlEX Pigment Powder comes in a wide range of colours and can add a luminous and iridescent quality to your projects.
When using PearlEX Pigment Powder with Unicorn SPiT Gel Stain and Glaze, you can mix the pigment powder into the gel stain or glaze to create custom colours or effects. The PearlEX Pigment Powder can add a pearlescent, shimmery, or iridescent quality to the Unicorn SPiT, resulting in unique and eye-catching finishes on your projects.
To use PearlEX Pigment Powder with Unicorn SPiT Gel Stain and Glaze, you can follow these general steps:
- Start by preparing your surface according to the instructions of the specific product you are using, whether it's wood, fabric, glass, or another material.
- Mix a small amount of PearlEX Pigment Powder into the Unicorn SPiT Gel Stain and Glaze. The amount of pigment powder you use will depend on the intensity of the colour or effect you want to achieve, so you may need to experiment with different ratios to obtain your desired result.
- Stir the mixture thoroughly to ensure the pigment powder is evenly distributed.
- Apply the mixture to your surface using a brush, sponge, or other applicator, depending on the effect you want to create.
- Allow the mixture to dry. Then seal and protect your project using a clear sealer or topcoat, such as Famowood.
It is important to note that the specific techniques and results may vary depending on the type of surface, the colours and ratios used, and other factors. It's recommended to experiment on a small test piece before applying the technique to a larger project to ensure the desired outcome. Always follow the instructions and safety precautions of the specific products you are using, and work in a well-ventilated area.
If you’d like to purchase PearlEX Pigment Powders, they’re available to order from the local Australian craft supplier, Beads N Crystals.